Have you ever thought that your current coffee table is not as functional as before? Or you feel kind of bored with it? In this case, there is one unique idea that lets you change the function of your coffee table. You can make this table into a stylish ottoman or table with a soft tabletop. How to do it? padded coffee table covers are the answer. If you are interested, consider trying this easy and quick guideline that you can do at your house.
This Is The Guideline To Make The Padded Cover For Your Coffee Table You Should Know
The Materials And Equipment needed
Started with the basic material and equipment. If you think you need to spend a fortune to do this project, you are wrong. Rather than buying a new ottoman, you can make one by yourself. All you need is a coffee table, 4 –inch foam, staple gun and staples, utility knife, upholstery fabric, maker, and tape measure. Those are the basic materials and equipment you will need for this project. Other than that, you might need a hammer, hack saw, and decorative nail.
Choosing And Cut The 4 –inch Foam
A padded coffee table covers need the right foam. The thickest one, 4-inch, is the one that recommended. It is cushiony and affordable. Before you buy, make sure to measure the table so you get the best-fitted foam. Highly possible that you won’t be able to find the right size, so you may need to do some cutting. In this case, as long as you use the very sharp utility knife the cutting process can be done in an instant. Just make sure to be careful when using it.
Glue the foam And Adjust The Table Height
After you got the exact correct size, you will need to glue the foam to your coffee table. in this matter, you should ready to let go of the coffee table. Use a high multipurpose adhesive as the glue. With the foam for padded coffee table covers attached, the coffee table height will increase significantly. If you feel the height was too tall, opt to shorten the legs using a hack Shaw. If you okay with the height, go to the next step.
Choosing And Attaching The Fabric Cover
The upholstery fabric is vital for this project. Before you buy one, you should consider the new dimension of your table (added with the foam). It is advised to have at least 2 inches of excess fabric on each side of the table. The excess will later tuck under the tabletop. Attach and secure the fabric by tucking and staple the excess fabric under the table. pull the fabric down slowly and securely while adding staples every few inches.
Clean Up And Finishing Touch
After this far, your padded coffee table covers are in 90% progression. Now, all you need to do is to Tidy up the corner by making pretty upholster corners. Just pull the corner fabric tight, staple, and then overlap with other corners and staple it again. From there, clean up the excess fabric by trimming it slowly. Finish the project by adding upholstery tacks. It is also known as decorative nails, which is good to cover the staples.
Those are the simple 5 steps you can do to make a padded cover. You don’t need any expensive materials. You can use the existed coffee tables, staple gun, fabric, and 4-inch foam. After that, all you need to do is to make correct measurements for foam and the table height. Choose and attach the fabric for the cover, clean it up, and finish the project. With this, not only you can cover the table but also make a whole new functional furniture – ottoman.
So, if you’d like to acquire all of these amazing photos related to Easy And Quick Guideline To Make Padded Coffee Table Covers, press save icon to store these graphics for your personal PC. There’re available for transfer, if you’d prefer and want to own it, simply click save logo on the web page, and it’ll be directly down loaded to your PC.
Here you are at tablecoversdepot.com, article above Easy And Quick Guideline To Make Padded Coffee Table Covers published. Some people trying to find details about coffee table covers ideas and certainly one of these is you, is not it?